CWS has compiled a list of commonly requested documentation for the benefit of our clients. Should you have any
questions or concerns regarding these products, please feel free to contact one of our highly qualified staff.
Smith Fibercast (a division of Fiberglass Systems) pipe has been installed in tough corrosive applications for
over 50 years in the oil and gas industry as well as chemical and industrial applications.
General Literature
Bulletin No. C3030 offers a quick
overview of products available from Smith Fibercast.
Bulletin No. E5615 Smith Fibercast
Chemical Resistance Guide for Fiberglass Piping,
Bulletin No. E5500 Smith Fibercast
Engineering & Piping Design Guide for Fiberglass Piping,
Bulletin No. E6000 Smith Fibercast
Pipe Installation Handbook for Fiberglass Piping,
Red Thread II
RED THREADŽ II piping is an unlined, filament wound product ideal for light chemical services in salts,
solvents and pH 2-13 solutions that corrode traditional metal pipe. It has been used extensively with great
success for petroleum production applications such as saltwater handling, CO2, crude oil and gas, food
processing services, water and wastewater facilities, HVAC,and chemical processing services. The T.A.B.
(Threaded and Bonded) joint offers quick installation for long piping runs.
Size Range:
2" - 24"
Temperature Range:
Up to 210 degF / 100 degC
Pressure Rating:
300 psig
Construction:
Filament wound with aromatic amine cured epoxy resin and fiberglass roving.
RED THREADŽ II Performance Plus piping is a filament wound product constructed of fiberglass and aromatic
amine cured epoxy resin. Manufactured in compliance with API Spec 15LR, the piping system offers pressure
ratings up to 450 psig. It has been used extensively with great success for petroleum production applications
such as saltwater handling, CO2 and crude oil and gas.
Size Range:
8" - 16"
Temperature Range:
Up to 210 degF / 100 degC
Pressure Rating:
450 psig
Construction:
Filament wound with aromatic amine cured epoxy resin and fiberglass roving.
GREEN THREAD filament wound piping offers excellent chemical resistance to dilute acids and caustics. The
bell and spigot connection offers quick installation.
Size Range:
1" - 24"
Temperature Range:
Up to 225 degF / 107.2 degC
Pressure Rating:
300 psig
Construction:
Filament wound with aromatic amine cured epoxy resin and fiberglass roving.
These products are used to transport highly corrosive fluids primarily found in enhanced oil recovery activities.
In these applications, high pressure FRP injection lines carry station to injection wells. Additionally, line pipe
is also used in lower to medium pressure gas and oil flow lines where corrosive fluids are encountered.
Size Range:
1 1/2" - 8"
Temperature Range:
Up to 150 degF / 65.5 degC
Pressure Rating:
up to 2750 psig
Construction:
Anhydride Cured Epoxy with Premium Fiberglass Reinforcement.
Joint Types:
API 8rd Advanced Composite Thread (ACT)
Chemical Service:
Flow or injection lines, transfer or disposal lines for Oil, Gas, Saltwater, CO2 and H2S
These products are used to transport highly corrosive fluids primarily found in enhanced oil recovery activities.
In these applications, high pressure FRP injection lines carry station to injection wells. Additionally, line pipe
is also used in lower to medium pressure gas and oil flow lines where corrosive fluids are encountered.
Size Range:
1 1/2" - 8"
Temperature Range:
Up to 220 degF / 104.4 degC
Pressure Rating:
Up tp 4000 psig
Construction:
Aromatic Amine Cured Epoxy resin with Premium Fiberglass Reinforcement
Joint Types:
API 8rd Advanced Composite Thread (ACT)
Chemical Service:
Flow or injection lines, transfer or disposal lines for Oil, Gas, Saltwater, CO2 and H2S
